Double Glazing Lock Repairs
Good locks on your windows and doors will stop burglars from gaining entry into your home. They generally don't like breaking glass or squeezing through windows that are not closed.
Some owners of double glazing, however, have had issues with their door or window lock after the installation. These problems can often be solved without the need for a new double glazing.
Broken or faulty locks
If your uPVC window or door lock is damaged or broken and requires a locksmith, they can fix it for you. They can repair hinges, striker plates, and locks for double glazing. They can also reposition the cylinder to fix any misalignment problems that could be causing your handle to not work correctly.
The mechanism may be locked when the key fits into the lock, but it will not turn or become difficult for you to insert. The dirt or grease could be trapped in the mechanism. If this is the case, it is possible to clean the lock and lubricate it. Use a dry lubricant like graphite or teflon and not oil, as oil can attract dirt and cause it to stick to the inside of the mechanism. After lubricating the lock you must insert the key and then try to turn it. The lubricant will work its way through the mechanism, and the lock should be able to rotate without difficulty.
A faulty lock can also be caused by loose screws in the lock mechanism. They can become loose and fall out or break off completely, preventing the lock from working properly. The screws can be tightened with a screwdriver, but you must be careful not to overtighten them. This can damage the internal components.
A faulty lock is dangerous for you and your family. This is particularly relevant if you have young children. They can open the door without knowing which gives them access to your house. If you're concerned about this happening, then a locksmith who is vetted can provide fast and efficient assistance to secure your double glazing doors.
Misty Glaze are a professional uPVC and double glazing business in Lancing and can repair all types of faulty and damaged mechanisms handles, handles, cylinders, and lock systems on both uPVC windows and doors. We can also alter the locking system on your uPVC windows or double glazing to meet your requirements. This means that replacement doors and/or windows are not always required.
Broken or Faulty Handles
As part of their overall security package many double-glazed windows come with a multipoint lock. This is a great choice for those worried about criminals who are looking for ways to gain access to your home. Ask your installer about antilift blocks. They can be installed alongside your existing locks and can ensure that your windows are securely shut.
Handle locks can be damaged or fail. They are the first part that criminals use to force open your window. Luckily, the good news is that this is one of the easiest parts to repair.
Modern uPVC handles and aluminium handles come with the multi-point locking mechanism referred to as Espagnolette, which is designed to ward off forced entry. This security upgrade is offered as an option for new uPVC windows. Older uPVC and aluminium handles can be upgraded to lock bolts that shoot also as an optional feature on all new double-glazed window installations.
It is crucial to fix the handle as soon as you can if it's damaged. A damaged handle could prevent the window from closing properly and allow drafts to enter. It could also be a vulnerability that thieves who are opportunistic could take advantage of and put the belongings of your family and you at risk.
The process of fixing the damaged mechanism begins with gaining access to the window frame and then removing the damaged handle. The gearbox is then opened to determine the type of gearbox that is used to open the handle. This allows a replacement that matches the profile and internal window frame mechanisms.
Once the mechanism is replaced the handle can then be re-affixed using the original screws - however, we usually recommend replacing them with larger ones since this will provide an even more secure fit. The final step is to seal the handle with a clear sealant. This will protect it from further deterioration. After that the window will be functional again and at only a double glazed window suppliers near me fraction of the cost of replacing the entire window.
Hinges that are broken or damaged
If your windows do not shut properly, you could suffer from draughts or the weakening of your home's security barrier and an increased risk of damp double glazed windows near me or water damage. Windows hinges that break or become faulty are a common issue and can be easily repaired.
If your windows made of uPVC won't open or close, it is likely that hinges need to be repaired or replaced. While most window manufacturers require you to purchase a new window to fix this simple problem We're able to repair the hinges that are damaged and save you money.
Window hinges are usually damaged by repeated use, or they are weakened over time by corrosion. If you find a broken hinge, it's important to take steps to prevent more info further damage by being careful not to push the window to close or open.
The type of hinge you are looking for will help you find the correct parts to fix it. Maco, Mila and Roto are all window hinges. Get advice from a professional before buying parts that do not work with your existing hardware. This can cause more damage.
A faulty hinge is a major issue for uPVC doors and windows. They can be a significant source of noise and can also allow water infiltration that can cause damage to your windows.
Verify whether the pin barrels on both sides of the hinge are aligned. If it isn't, tap the headpin with the hammer to make a slight bend in the hinge barrel. This will help to keep the pin in place. Have a person hold the doors while you remove hinge screws and hinges. Replace the hinges with ones that are the same size and install the screws with glue. After the glue is drying, fix the hinges using weights or clamps.
Once you have repaired your hinges, you can install the door again. You could also reattach the handle. It is a good idea to replace the screws with the same length of dowels as the screw that was originally double glazing company near me used so that they are in line with each the other.
Glass that is broken or is damaged
While uPVC windows do an excellent job of keeping the cold out and the heat in, they are susceptible to becoming damaged over time. This could include cracked or damaged glass as well as defective locks. If not taken care of, it can be a costly problem. It can also affect your home's aesthetics and lead to a loss in insulation. It is important to repair any damage immediately.
You can repair your cracked glass by yourself if your have the appropriate tools and techniques. Make sure the area surrounding the glass that has been broken is free of debris so that any fragments don't cause injury or cause a trip hazard. Then, take any broken pieces and dispose of them properly. Apply masking tape across the entire area. This will stop glass fragments from sticking to your skin and splintering when you move them. If you're dealing with a double-paned window it's a good idea fit the glass pane before gluing it back into place to ensure that you'll have enough space to complete the task.
Use a dry, clean cloth to clean the glass's surface and the frame before applying the glue. Follow the directions for application and curing that can differ from product to product. You may have to clamp the glass that has cracked with lightweight clamps designed to hold fragile materials, depending on the angle.
After the adhesive has fully cure, carefully install the glass inside the window frame, ensuring it's flush with the edge of the frame and that there are no gaps between the glass and the window sash. Be careful to avoid flexing the window as it's being installed, as this could weaken the seal and cause condensation and water infiltration.
If you have a glass here window that is completely broken or has larger cracks, consult a professional glazier like O'Brien(r) to arrange a replacement. It's crucial to act fast in the event of broken glass.